2/21/2023 0 Comments L298n motor driver![]() However, I found these to be the most useful ones: There are a few different datasheets available on the internet. Note, that depending on the motor you use, the IC will get really hot and youâll most certainly need to use it with a heat sink to avoid damaging your build. If both pins are pulled high, the motor will stop again. To reverse the motor, reverse the states of the inputs. If either of the pins is HIGH while the other one is LOW, the motor will spin in one direction. When both, INP_A and INP_B, are low, the motor is off. ![]() The direction of each motor can individually be controlled with two input pins: These are usually labeled OUT_1 and OUT_2. ![]() Each motor has its respective positive and negative terminal to which it has to be connected. This is a dual H-Bridge controller, which means it can control up to two motors simultaneously. However, most modules have a built-in step-down converter and can be used with voltages up to 35V) Supply voltage: 5V (All modules will work safely with 5V. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |